5.1 Set up the system
About this section
This section describes how to prepare the bioreactor system for cell cultivation. For illus-
trations and descriptions of the system, refer to Chapter 3 System description, on page 41.
In this section
See pageSection
1055.1.1 Select the tray and Cellbag bioreactor
1065.1.2 Attach and detach tray
1095.1.3 Prepare pH and DO sensors
1125.1.4 Attach the Cellbag bioreactor
1145.1.5 Prepare the pump
1195.1.6 Connect gas to the system
104 ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
5 Operation
5.1 Set up the system
To Next Page
Loading...
Need help?
General
