GE ReadyToProcess WAVE 25 User Manual

4.1.3 Client computer specifications
Introduction
The table below lists client computer specifications for a UNICORN 7.0 system for use
with ReadyToProcess WAVE 25.
ReadyToProcess WAVE 25 is supplied with UNICORN 7.0, which requires Windows 7. If
you wish to use ReadyToProcess WAVE 25 with an earlier version of UNICORN, contact
GE for assistance.
General computer specifications
Installation is supported for Windows 7 Professional, 32-bit or 64-bit, with Service Pack
1 or Windows 10 Professional 64-bit.
For information about compatibility between UNICORN versions and the supported op-
erating systems and database versions see the UNICORN compatibility matrix at
http://www.gelifesciences.com/UNICORNcompatibility.
E-License ServerWorkstation
installation
Database ServerUNICORN Client
500 MB12 GB6 GB6 GBMin. free disk
space
2 GB3 GB3 GB3 GBMin. available RAM
NTFSNTFSNTFSNTFSDisc format
Intel Dual Core (or
faster)
Intel Dual Core (or
faster)
Intel Dual Core (or
faster)
Intel Dual Core
(or faster)
Architecture
Note: •
UNICORN is tested using the English (U.S.) Code 1033 operating system
language version. Using other language versions of the operating system
may cause errors.
•
A screen resolution of 1280x1024 or higher is recommended. Parts of the
UNICORN user interface may not be displayed properly using a lower res-
olution.
•
Changing the default font and changing the font size from 100% in Win-
dows may cause problems in the UNICORN user interface.
•
The Windows basic color scheme is recommended
1
.
1
UNICORN must be closed when the color scheme is changed.
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD 81
4 Installation
4.1 Site preparation
4.1.3 Client computer specifications

GE ReadyToProcess WAVE 25 Specifications

General

Brand	GE
Model	ReadyToProcess WAVE 25
Category	Laboratory Equipment
Language	English