GE ReadyToProcess WAVE 25 User Manual

3.2 ReadyToProcess WAVE 25 rocker
Introduction
The rocker is the main unit of the system. Through the rocker, weight is measured, and
temperature, rocking speed, rocking angle and rocking motion are controlled.
The rocker contains four load cells for monitoring the weight of the Cellbag bioreactor
and content. The placement of the load cells allows independent weight measurement
of the two Cellbag bioreactors in dual mode.
The rocker also contains an embedded microprocessor, which allows the system to be
controlled independently of the performance of the connected network and client
computer.
For specifications of the rocker, refer to the ReadyToProcess WAVE 25 System Handbook
or the data file for ReadyToProcess WAVE 25, available for download from
www.gelifesciences.com/wave.
Front view of the rocker
The illustration below shows the front view of the rocker.
1
3
4
5
2
44 ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
3 System description
3.2 ReadyToProcess WAVE 25 rocker

GE ReadyToProcess WAVE 25 Specifications

General

Brand	GE
Model	ReadyToProcess WAVE 25
Category	Laboratory Equipment
Language	English