GE ReadyToProcess WAVE 25 - Safety precautions

2.1 Safety precautions
Introduction
ReadyToProcess WAVE 25 is powered by mains voltage and handles materials that may
be hazardous. Before installing, operating or maintaining the system, you must be aware
of the hazards described in this manual.
Follow the instructions provided to avoid personal injuries, damage to the cell cul-
tures, to the product, or to other personnel and equipment in the area.
The safety precautions in this section are grouped into the following categories:
•
General precautions
•
Flammable liquids and explosive environment
•
Personal protection
•
Installing and moving the equipment
•
Power supply
•
System operation
•
Maintenance
Some of the safety precautions in this chapter concern situations that are described in
other manuals.
General precautions
WARNING
Do not operate the product in any other way than described in the
user documentation.
WARNING
Only properly trained personnel may operate and maintain the
product.
WARNING
Do not use any accessories not supplied or recommended by GE.
18 ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
2 Safety instructions
2.1 Safety precautions