3.4 ReadyToProcess Pump 25
Introduction
The ReadyToProcess Pump 25 is a peristaltic pump unit that includes two roller pump
heads. The function of a given pump head is set in the UNICORN software. Up to three
pump units are supported in both single and dual mode.
For specifications of the pump, refer to the ReadyToProcess WAVE 25 System Handbook
or the data file for ReadyToProcess WAVE 25, available for download from
www.gelifesciences.com/wave.
Front view of the pump
The illustration below shows the front panel of the pump.
DescriptionPart
Pump head flip top1
Pump head2
Status LEDs for pumping function per pump head3
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD 55
3 System description
3.4 ReadyToProcess Pump 25
To Next Page
Loading...
