GE ReadyToProcess WAVE 25 User Manual

2.2.2 Safety labels
Safety labels on ReadyToProcess
WAVE 25 rocker
The following symbols can be found on the rocker.
DescriptionLabel
Warning! Read the user documentation before using the sys-
tem. Do not open any covers or replace parts unless specifically
stated in the user documentation.
Indicates a risk for body parts getting caught between two
parts of the system and that care must be taken to avoid injury.
Safety labels on ReadyToProcess
Pump 25
The following symbols can be found on the pump.
DescriptionLabel
Warning! Indicates a risk for fingers getting caught between
moving parts in the pump and that care must be taken to avoid
injury.
Safety labels on filter heater
The following symbols can be found on the filter heater.
DescriptionLabel
Warning! Indicates a hot surface and that care must be exer-
cised to prevent injury.
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD 31
2 Safety instructions
2.2 Labels
2.2.2 Safety labels

GE ReadyToProcess WAVE 25 Specifications

General

Brand	GE
Model	ReadyToProcess WAVE 25
Category	Laboratory Equipment
Language	English