GE ReadyToProcess WAVE 25 User Manual

5.2.2 Connect to the system
Follow the instructions below to connect the system to UNICORN.
ActionStep
When the indicator light on the rocker front panel shows a steady
green light, click the Connect to Systems icon in the System Control
module.
Result: The Connect to Systems dialog opens.
1
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD 125
5 Operation
5.2 Start and configure the system
5.2.2 Connect to the system

GE ReadyToProcess WAVE 25 Specifications

General

Brand	GE
Model	ReadyToProcess WAVE 25
Category	Laboratory Equipment
Language	English