EasyManuals Logo

GE ReadyToProcess WAVE 25 User Manual

GE ReadyToProcess WAVE 25
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
1.4 Important concepts
Concepts and abbreviations used in this manual are explained in the table below.
ExplanationConcept/
abbreviation
The disposable container in which the cells are cul-
tured.
Cellbag™ bioreactor
Dissolved oxygen.DO
Optical sensor for measurement of dissolved oxygen.
Attached to DO configured Cellbag bioreactors.
DO sensor
Operating mode with one Cellbag bioreactor on the
rocker.
Single mode
Operating mode with two Cellbag bioreactors on the
same rocker. Cultivation is monitored and controlled
independently in the two bioreactors.
Dual mode
Optical sensor for pH measurement. Attached to pH
configured Cellbag bioreactors.
pH sensor
Control unit for gas mix, pH and DO control.ReadyToProcess™ CBCU
The pump.ReadyToProcess Pump 25
The rocker.ReadyToProcess WAVE 25
rocker
Tray for Cellbag, mounted on the rocker. Different
tray sizes are available for different culture capacities.
Tray
The entire bioreactor system, including rocker,
CBCU(s), and pump(s), together with Cellbag bioreac-
tor(s) and filter heater(s).
ReadyToProcess WAVE 25
The ReadyToProcess WAVE
25 system
The bioreactor system
The software used for controlling and monitoring the
system.
UNICORN
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD 15
1 Introduction
1.4 Important concepts

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE ReadyToProcess WAVE 25 and is the answer not in the manual?

GE ReadyToProcess WAVE 25 Specifications

General IconGeneral
BrandGE
ModelReadyToProcess WAVE 25
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals