5.2.1 Start the system and log on to UNICORN
Follow the instructions below to start the system and log on to UNICORN. The workstation
must have a valid e-license.
See Section 4.3.2 Configure an e-license, on page 94 for more information about e-licenses.
ActionStep
Switch on the client computer.1
Start the UNICORN software.2
Provide your User Name and Password to log on to UNICORN. Access cre-
dentials are assigned by your UNICORN administrator. According to the
properties of your user account, you may be able to select an Access Group.
3
Note:
If Use Windows Authentication is checked, you may log on using your Win-
dows username and password.
Press the Power switch to start the rocker.4
Result: The Power button flashes green during start-up, and then lights
steadily when the rocker is operational.
124 ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
5 Operation
5.2 Start and configure the system
5.2.1 Start the system and log on to UNICORN
To Next Page
Loading...
Need help?
General
