4 Installation
About this chapter
This chapter provides required information to enable users and service personnel to:
•
unpack the bioreactor system delivered from the factory
•
install the system units
•
install UNICORN 7.0 software
•
edit system properties
Read the entire installation chapter before starting to install ReadyToProcess WAVE 25.
NOTICE
The rocker contains load cells for weight measurements and should
be handled with extra care. Do not place the rocker on any parts
that may move. Avoid exposing the load cells to lateral forces, such
as pushing the unit sideways on the bench, which may cause dis-
turbances in the measurement or damage the load cells.
In this chapter
This chapter contains the following sections:
See pageSection
744.1 Site preparation
834.2 Hardware installation
904.3 Software installation
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD 73
4 Installation
To Next Page
Loading...
Need help?
General
