GE ReadyToProcess WAVE 25 User Manual

Status LEDs
The status LEDs indicate the pumping function status according to the following table.
DescriptionLight indicator
The pumping function is ready for operation.Steady green light
Pumping is ongoing.Green flashing light
Indicates an internal error, but the pump is still operating.Red flashing light
Indicates an internal error, and the pump is not operating
properly.
Steady red light
Rear view of the pump
The illustration below shows the rear panel of the pump.
3
2
1
DescriptionComponentPart
Power connection to the rocker.UniNet-9 port1
Indicates system connection status.CAN indicator LED2
Shows the unit number of the pump for recognition
by the system.
CAN ID switch3
56 ReadyToProcess WAVE 25 Operating Instructions 29009597 AD
3 System description
3.4 ReadyToProcess Pump 25

GE ReadyToProcess WAVE 25 Specifications

General

Brand	GE
Model	ReadyToProcess WAVE 25
Category	Laboratory Equipment
Language	English