GE ReadyToProcess WAVE 25 User Manual

Power supply
WARNING
Supply voltage. Before connecting the power cord, make sure that
the supply voltage at the wall outlet corresponds to the marking
on the instrument.
WARNING
Protective ground. bioreactor stand-alone instruments must al-
ways be connected to a grounded power outlet.
WARNING
Only use grounded power cords delivered or approved by GE.
WARNING
Access to power switch and power cord with plug. Do not block
access to the power switch and power cord. The power switch
must always be easy to access. The power cord with plug must
always be easy to disconnect.
WARNING
Disconnect power. Always disconnect power from the equipment
before connecting the ReadyToProcess WAVE 25 units to any other
instrument.
ReadyToProcess WAVE 25 Operating Instructions 29009597 AD 21
2 Safety instructions
2.1 Safety precautions

GE ReadyToProcess WAVE 25 Specifications

General

Brand	GE
Model	ReadyToProcess WAVE 25
Category	Laboratory Equipment
Language	English