GE Reason H49 - Page 146

Technical Manual
GE Reason H49
146
H49/EN M/C22
12.1.4.4 Security Commands
Security Settings
The following values can be set in the Security configuration to setup security options
about user session and user password policy.
security [-d] [-h] [-v] [-I <minutes>] [-l <minutes>] [-a
<nb_max_attempts>] [-P] [-L <length>] [-i] [-f]
command parameter Description Values
security
-f
Reverts the switch to factory settings (Need reboot)
-i
Displays information about user login and password policy User name, <null>
-l
Lock period in minutes 1 to 999
-a
Maximum login attempts 3 to 10
-I
Inactivity period to log off users 1 to 999
-L
Minimum user’s password length
-P
Enables / Disables password policy Enable, Disable
-c
sets a new LDAP certificate
-s
sets a new syslog certificate
-k
sets a new key store for Reason web user interface
User Account
The following values can be set to configure and manage all user accounts (create,
modify or delete user or user group...).
command parameter Description Values
account
-c
Creates a new user
-g
Adds user role Viewer, engineer, secadm, secaud
-m
Modifies group GID
-u
Sets the user login name
-n
Modifies the user login name
-f
Modifies the user full name
-p
Sets a new password for a user
-r
Removes a user
-s
Enables / Disables a user account Enable, Disable
-R
Removes role from a user
-U
Unlocks user account
-e
Sets the expiration period for the specified user account