GE Reason H49 - Page 152

Technical Manual
GE Reason H49
152
H49/EN M/C22
12.2.2.2 VLAN
The example below shows the use of the vlan command line:
Command Description
vlan -c -l -p
Sets the name of the VLAN, its ID and the ports to be added
Example:
vlan –c test –l 5 –s test –p CE01:CE02:CE03:CE04:CE05
12.2.2.3 MacAddress Table
The example below shows the use of the macAdressTable command line:
Command Description
macAddressTable -a -b -f
Sets the MAC address lifetime, aging base time and HSR entry forgetTime
Example:
macAddressTable –a 48 –b4 –f 10
12.2.2.4 NTP
The example below shows the use of the ntp command line:
Command Description
ntp -s -c -a -p
Disables or enables the local NTP server and client and sets the IP address of remote
NTP server together with the poll rate of NTP client
Example:
ntp –s disable –c disable –a 127.0.0.1 –p 3