How do I troubleshoot a heatsink temperature too high alarm on my Gefran Power Supply?
If your Gefran Power Supply displays a 'Heatsink temperature too high alarm', verify the correct operation of the cooling fan and check that the heatsinks are not clogged.
What to check if gefran AFE200 Power Supply shows drive overload alarm?
If the Gefran Power Supply displays a 'Drive overload alarm', check that the size of the drive is suitable for the application.
How to troubleshoot 'No supply voltage at the power section' on gefran AFE200?
If your Gefran Power Supply shows 'No supply voltage at the power section', check the drive power supply.
General| Brand | gefran |
|---|---|
| Model | AFE200 Series |
| Category | Power Supply |
| Language | English |
Defines the necessary qualifications for personnel working with the equipment.
General warnings about dangerous voltages, mechanical parts, and potential hazards.
Details on capacitor charging and safe waiting times before working on terminals.
Overview of the AFE200 series and its advantages in automation systems.
Explanation of the product code structure and nameplate details.
Information and ordering codes for parallel inverter configurations.
Requirements for mounting angle and maintaining adequate air flow.
Diagrams showing dimensions and fastening points for wall mounting.
General safety warnings applicable to wiring procedures.
Emphasizes the critical importance of proper grounding for safety.
Prohibition of operating the drive without a connected ground wire.
Details and instructions for wiring the power section.
Block diagrams illustrating the power section connections for different models.
Wiring diagrams for AC power line connections for various drive sizes.
Diagrams showing the DC output connections to the DC bus.
Information and procedures for the regulation section wiring.
Explanation of switch, jumper, and LED settings on the regulation card.
Details on the RS485 serial interface port (XS connector).
Connection with galvanic isolation using the OPT-RS485-ADV card.
Schematic diagrams for typical drive connections.
Responsibilities for electrical commissioning, grounding, and power supply.
Tables specifying cable cross-sections and tightening torques.
Instructions for connecting and shielding the regulation section.
Instructions for point-to-point RS485 connection without galvanic insulation.
Guidelines for setting up multi-drop RS485 connections.
Overview of the LCD display and membrane keyboard.
Guide to navigating the drive's menu structure.
How the alarms page is displayed and how alarms are identified.
Functions for saving and recovering parameter settings on the keypad.
Explanation of AFE200 control programming navigation keys.
How parameters are displayed, including their components.
Procedures for resetting alarms from the keypad.
Procedure to transfer parameters from the drive to the keypad memory.
Steps for modifying numeric and binary parameters.
Procedure for saving parameter settings to maintain them after power-off.
Procedure to transfer parameters from the keypad memory to the drive.
Grounding requirements and precautions for safe installation.
Guided procedure for quick start-up of the drive.
Instructions for connecting power supply and enabling contacts.
Explanation of drive programming methods.
Identification of terminals carrying dangerous voltages even when drive is inoperative.
Explanation of the startup wizard's purpose and steps.
Procedure for setting the DC link capacitor value.
Prohibition of using the equipment as an emergency stop mechanism.
Procedure for setting the line choke value.
How to program function blocks for analog and digital input signals.
Procedure for setting DC link voltage and ramp times.
How to assign control signals to function block inputs.
Warning regarding the high operating voltages of the AFE200.
Mandatory requirement to connect the ground wire before operation.
Procedure for saving new parameter settings after power-off.
Displays measured values and drive operating parameters.
Lists parameters for drive size, family, region, firmware, etc.
Command to save current parameter values to permanent memory.
Setting the available mains frequency in Hz.
Setting a password to protect parameters from unauthorized tampering.
Setting the switching frequency value in kHz.
Setting the available mains voltage value.
Setting the digital reference for the DC-link voltage ramp.
Setting the acceleration ramp time for the DC bus voltage.
Setting the deceleration ramp time for the DC bus voltage.
Explains Local/Remote modes and command sources.
Defines source for Enable/Start commands in Remote mode.
Setting the operating mode to Local or Remote.
Defines source for Enable/Start commands in Local mode.
Selecting the source signal for switching between Remote and Local modes.
Illustrates the logic and functions of digital outputs.
Selects the signal source for motor rotation direction.
Table of alarm codes, messages, and their corresponding solutions.
To Next Page
