2 ADL300 • Functions description and parameters list
Information about this manual
This manual explains the functions and the description of the parameters.
The informations about mechanical installation, electrical connection and fast start-up can be found on the ADL300 Quick
start guide.
The whole set of manuals can be found on the CD provided with the drive.
Firmware version
This manual is updated according the rmware version V 4.X.7 .
The identication number of the rmware version is indicated on the identication plate of the drive or can be checked with
the PAR 490 Firmware ver.rel parameter, menu 2.7.
General information
Note ! In industry, the terms “Inverter”, “Regulator” and “Drive” are sometimes interchanged. In this document, the term “Drive” will be used.
Before using the product, read the safety instruction section carefully. Keep the manual in a safe place and available to
engineering and installation personnel during the product functioning period.
Gefran Drives and Motion S.r.l. has the right to modify products, data and dimensions without notice. The data can only be
used for the product description and they can not be understood as legally stated properties.
Thank you for choosing this Gefran product.
We will be glad to receive any possible information which could help us improvingthis manual.
The e-mail address is the following: techdoc@gefran.com.
All rights reserved.