Gerber enVision - Page 53

Advanced enVision Functions 49
4. To reset the number of data bits, press F1, DATA BITS.
5. Press F3 or F4 to change the Data Bits setting. You can choose from

or

data bits. Press ENTER to record the setting and return to the
Communications menu.
6. If you want to change the baud rate, Press F2, BAUD.
7. Press F3 or F4 to change the baud rate. You can choose from

 
or

. Press ENTER to record the setting and return
to the Communications menu.
(
'06'4 &#6# $+65
&CVC $KVU 

'06'4 -G[ VQ #EEGRV
(
(
(
%1//70+%#6+105
&#6# $+65 5612 $+65
$#7& 4#6' 2#4+6;
'06'4 HQT /CKP /GPW
'06'4 $#7& 4#6'
$CWF 
 
'06'4 -G
[
VQ #EEG
R
V
(
(
%1//70+%#6+105
&#6# $+65 5612 $+65
$#7& 4#6' 2#4+6;
'06'4 HQT /CKP /GPW