25
Vapodest 50s carousel
6 Operation
6.1. General information / Main functions
The operation of the Vapodest is done using a PC with the controller software
Vapodest-Manager. Using the operator button, various operations, like e.g. the pH-
calibration or rinsing of the pumps, can be started directly at the distillation unit.
The bi-directional data exchange between PC and Vapodest allows a permanent
monitoring of the status directly at the monitor of the PC. In case of any problems,
there will be an error message.
Vapodest Manager offers you the following main functions:
1. System setting
Functions for e.g. selection of language, basic functions, calibration of the
pumps, pH-calibration, titration functions, statistics about the instrument, and
many more features.
Make sure to also read chapter 7
2. Create a method (Programming)
Determine program parameter for the various methods, store and administer
them. All parameter necessary for controlling the distillation/titration are dened
as well.
Make sure to also read chapter 8
3. Sample input
Dening the series and input of sample data like e.g. the sample name, weight,
kind of sample etc. A series can have up to 20 samples, which can be different
sample types, blank samples and standards.
Make sure to also read chapter 9
4. Execution of method
Start analysis, monitor status of analysis etc
Make sure to also read chapter 10
5. Table of results
Display of the results, administration of results, information about running of
analysis, in- and export of table with results, and many more.
Make sure to also read chapter 11
To Next Page
Loading...
