72
Vapodest 50s carousel
PTFE-tubing 4 x 6 1000559
PVC-tubing 4 x 7 1000500
PVC-tubing 8 x 12 1000047
PTFE-tube suction for titration liquid
(with tting) 1001724
PTFE-tube with stretched point for titration acid
(with tting) 1001672
Tubing reduction, PP 51 x 10 x 10 1000397
Tubing reduction, PP 51 x 10 x 5 1000398
Lower part, carousel
Tank 10 liter for H
3
BO
3
and NaOH 1001981
Tank 20 liter for H
2
0 and waste sample 1000341
Tank 5 liter for titration acid 1001980
Quick lock for tank lid H
2
O and H
3
BO
3
consists of:
1 x Snap coupling with cut-off 1001982
1 x Snap lid plug with cut-off 1001984
Quick lock for tank NaOH consists of:
1 x Snap coupling with cut-off 1001983
1 x Snap lid plug with cut-off 1001985
Quick lock for tank Sample Waste consists of:
1 x Snap coupling without cut-off 1002173
1 x Snap lid plug without cut-off 1002174
Protection hood for carousel 1001908
Drip tray for carousel 1001905
Round belt 4 x 960 for carousel drive 1001921
Side extension (for Laptop or printer) 1001896
PVC-pipe 6 x 1, 300 mm 1002027
PVC-pipe 10 x 1, 230 mm 1002028
PVC-pipe 6 x 1, 230 mm 1002029
Level sensor with plug for "Sample waste" tank, complete 1002121
Level sensor with plug for chemicals reservoir tank, complete 1002122
Level sensor with plug for water tank, complete 1002120
Level sensor with plug for titration tank, complete 1002123
Electronic
Sensor switch for service drawer and
control of the loading positions 1001874
Power-board 1001881
Control-board 1001880
Keyboard-Service display Carousel 1002001
15.3. Accessories
Sets for adaption
for tubes 250 ml:
Basket 250 ml 1001797
Carousel 20-place for 20 x 250 ml tubes 1001950
for tubes 400 ml:
Basket 400 ml 1001804
Carousel 16-place for 16 x 400 ml tubes (KDD and BS 400) 1001959
15 Maintenance
Snap coupling Snap lid
To Next Page
Loading...
