Gerhardt Vapodest 50s carousel - Error Messages Communication; Error Messages During Programming

62
Vapodest 50s carousel
12.5. Error messages during programming
12.4. Error messages communication
Error messages Trouble shooting
Dene a method (See chap. 8 Create a method).
Dene a rinsing method (See chap. 8 Create a me-
thod)
If the series is called up, which uses a program which
had been deleted after the sample input; it has to be
dened again. Call up main menu "Create a method"
and check programming..
No method available
No rinsing method
There are undefined methods
If the input is not correctly dened or not allowed, an error message is displayed during the respective program
step; the corresponding message is displayed. Please correct your input accordingly.
Error messages Trouble shooting
Saved data of the ComBox are written on the PC.
Press key 'OK' to start the process.
Check the cabling (see chap. 5.7. Connect PC/Lap-
top)
Vapodest Manager is looking for the auto sampler set
of tanks. If no auto
sampler is used, you h av e to e nt er u nder
System>Settings>Carousel and then -
Using internal set of tanks - 'No' (see chapter 7.4.
Carousel).
Incompatible Vapodest data on
PC. Copy data to PC.
No device found
Autosampler
Communication Problem
12 Error messages