Gesipa 8000 - Process Data

12 Process Data
Not in GAV-8000 eco
Process Data
The following parameters are saved in the process data file after each setting process:
● Date and time (time stamp)
● Profile and profile list used for evaluation
● Break-off displacement and break-off force (break-off point)
● Process evaluation
The process data file contains the last 1,000,000 processes. The oldest data are overwritten to
accommodate the latest data.
The recorded process data can be evaluated in the "Process Data" menu.
The "Process Data 20 Days" selection menu shows an overview of 20 days in the form of a bar
graph. By selecting individual days, the corresponding date, total number of processes, process
OK and process NOK are shown in the selection field. Detailed evaluation can be carried out
with Day .
The scaling of the piece number representation is adapted automatically to the highest value. In
this way, sections with low piece numbers are always shown in the same ratio. Sections with
considerably lower piece numbers can be rescaled with Scale .
<
Moves the representation back by one day.
>
Moves the representation forward by one day.
Current
Selects 20 days up to the current date.
Scale
Rescales the piece count.
Day
"Day Process Data" menu (detailed evaluation, one day)
12
Navigation:
AUTO
►MAN
► Menu
► Process data
Selection
Process data 20 days
Selection
- 79 -