Gesipa 8000 - Other Functions

28.10 Other Functions
PLC Interface
28.10 Other Functions
Inputs:
Input 4 "Block Start Cycle".
With input 4 "Block Start Cycle" is 1 (24 V), all triggering options (hand, foot, PLC, etc.) can
be blocked in "AUTO" mode (automatic).
Outputs:
Output 6 "MAN".
Output 6 "MAN" is 1 (24 V) indicates that GAV8000 is in "MAN" mode (manual operation,
set-up, troubleshooting, maintenance, etc.).
Output 15 "Maintenance".
Output 15 "Maintenance" is 1 (24 V) indicates that maintenance work is required for
GAV8000 (see Section 10 "Maintenance").
Relay:
Relay R5 is switched when output 15 "Maintenance" is 1 (24 V).
28
Navigation:
AUTO
►MAN
► Menu
► GAV settings
► PLC interface test
Other functions
- 117 -