GRAPHTEC CE7000-60 - Page 101

CE7000-UM-251-9370 7-27
7 DISASSEMBLY AND REASSEMBLY
How to reinstall the cam sensor board
(1) Reattach the cam sensor board in the reverse order in which it was detached.
(2) Conrm the dog of cam is not touching to the sensor of cam sensor board after cam sensor board was
attached.
Cam sensor dog
Conrm the dog of cam sensor is not touching to the
sensor here.
Cam sensor
(3) Conrm the wiring for cam sensor exible cable (Refer to subsection 7.4.).
(4) When the cam sensor board was replaced, backup the adjustment values to the cam sensor board from
the main board.