GRAPHTEC CE7000-60 - Belt Tension Adjustments; Y-Belt Tension Adjustment

CE7000-UM-251-9370 7-59
7 DISASSEMBLY AND REASSEMBLY
7.3 Belt Tension Adjustments
7.3.1 Y-Belt Tension Adjustment
How to adjust the Y-belt tension
(1) Move the pen block to the right side end.
(2) Loosen the (two) tension xing screw(s), then tension spring makes the Y belt tension automatically.
CE7000-40/60
Tension xing screw
Tension xing screw
CE7000-130/130AP/160
(3) Tighten the (two) tension xing screw(s) to keep
the
Y belt tension.