CE7000-UM-251-9370 40
9 TROUBLESHOOTING
9.7.7 Clear Setup Mode
This mode returns all the conditions to their default settings.
How to clear the setups
(1) Turn on the power while pressing the UP ARROW key to display the menu shown below.
(2) Press the F1 key (DEFAULT SETTING). The following menu is displayed.
(3) Press the F1 key (SET DEFAULT). The following menu is displayed.
(4) Press the F1 key (CONTINUE). The following menu is displayed.
Do not turn off the power when the above menu is displaying.
It will take about one minute to set the default settings.
(5) When the default setting was nished, the COMPLETE message appears on the LCD panel.
(6) Turn off the power.
To Next Page
Loading...
