GRAPHTEC CE7000-60 - Replacing the Push Roller Base

CE7000-UM-251-9370 7-55
7 DISASSEMBLY AND REASSEMBLY
7.2.19 Replacing the Push Roller base
CE7000-40/60
How to detach the Push Roller base
(1) Detach the push roller assembly (Refer to subsection 7.2.18.).
(2) Release the spring from the push roller arm.
Push roller arm
Spring
(3) Detach the cam from the push roller assembly.
Cam
(4) Remove the two E-ring holding the shafts of push roller base, and then pull out the push roller base
shaft.
E-ring
Push roller base shaft
(5) Detach the push roller base.
Push roller base
How to reinstall the Push Roller base
(1) Reattach the push roller base in the reverse order in which it was detached.