CE7000-UM-251-9370 7-54
7 DISASSEMBLY AND REASSEMBLY
How to reinstall the Push Roller Assembly
(1) Reattach the push roller assembly in the reverse order in which it was detached.
(2) When the cam shaft is inserting to the cam, conrm the direction of cam that push-roller is possible to
lift up or down by the set-lever.
(3) Slide the stopper of push roller assembly to a mark, and then tighten the screw for the stopper.
(4) Reattach the other parts in the reverse order in which they were detached.
To Next Page
Loading...
