GRAPHTEC CE7000-60 - Replacing the Cam Sensor Board

CE7000-UM-251-9370 7-26
7 DISASSEMBLY AND REASSEMBLY
7.2.10 Replacing the Cam Sensor board
How to detach the cam sensor board
(1) Detach the right side cover (Refer to subsection 7.1.1.).
(2) Remove the M3L6 binding head screw holding the cam sensor board.
Cam sensor board
M3L6 binding head screw
CE7000-40/60
CE7000-130/130AP/160
M3L6 binding head screw
Cam sensor board
(3) Disconnect the exible cable from the cam sensor board.