GRAPHTEC CE7000-60 - Replacing the Control Panel Board

CE7000-UM-251-9370 7-16
7 DISASSEMBLY AND REASSEMBLY
7.2.4 Replacing the Control Panel Board
How to detach the control panel board
(1) Detach the control panel assembly (Refer to subsection 7.1.3.).
(2) Gently lift up the lock of connector for LCD exible cable on the control board, and then unlock the
connector.
Control panel cover
Control panel board
LCD
LCD exible cable
LCD exible cable connector
LCD exible cable
Gently lift up the lock of connector
and then unlock the connector.
LCD
Control panel board
(3) Disconnect the LCD exible cable from the control board.
(4) Remove the seven M2L5 self-tapping screws holding the control panel board, and then detach the
control panel board from the control panel cover.
Control panel cover
Control panel board
M2L5 self tapping screw
M2L5 self tapping screw
How to reinstall the control panel board
(1) Reattach the control panel board in the reverse order in which it was detached.
(2) Conrm the wiring for control panel board exible cable (Refer to subsection 7.4.).