GRAPHTEC CE7000-60 - CE7000-130 AP Main Specifications

CE7000-UM-251-9370 1-2
1 INTRODUCTION
1.1.2 CE7000-130AP Main Specications
CE7000-130AP
CPU 32-bit
Conguration Grit-rolling plotter
Drive Digital servo
Max. cutting area 1220 mm x 50 m
Guaranteed precision cutting area
*1 *2
1200 mm x 3 m
Mountable media width
*3
Min. 594 mm
Max. 1321 mm
Available roll media diameter Max. diameter: 200 mm, 3-inch paper core roll only
Number of push rollers 5
Max. cutting speed (Axial) 600 mm/sec(Omnidirectional)
Specifiable speeds 1 to 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60 cm/sec
Max. cutting force Tool holder: 4.41N (450gf)
Pen holder: 2.94N (300gf)
Min. character size 5 mm (0.197 in) alphanumeric Helvetica med. Font
*1
Mechanical resolution 0.005mm
Programmable resolution GP-GL: 0.1/0.05/0.025/0.01 mm, HP-GL
*4
: 0.025 mm
Repeatable accuracy
*1
0.1 mm/in unit of 2 m (Designated Film and Cut Conditions)
Number of cutters/pens 2
Usable pen types Water-based ber-tip pen, oil-based ballpoint pen
Compatible media Mono-vinyl chloride media, uorescent media, and reective media up to 0.25
mm thick (Excluding the high reective media)
Interfaces USB2.0 (Full Speed)/Network (Ethernet 10BASE-T/100BASE-TX)/RS-232C
*5
Buffer memory 2 MB
Resident command sets GP-GL/HP-GL
*3
(Control panel switching, Auto switching)
LCD Panel Graphic type (240 x 128 dots)
Power supply AC100-120V, AC200V-240V 50/60Hz
Power consumption 100 VA or less
Operating environment Temperature: +10˚C to +35˚C
Humidity: 35% to 75% (non-condensing)
Guaranteed accuracy environment Temperature: +18˚C to +28˚C
Humidity: 40% to 65%(non-condensing)
External dimensions (W x D x H) 1704 x 1148 x 1215 mm
Weight (Approx.)
*4
59.4 kg
*1: Varies depending on the type of Graphtec-authorized lm and the cutting conditions.
*2: When using basket.
*3: HP-GL is a registered trademark of the US Hewlett Packard Company.
*4: Stand and basket are included.
*5: RS-232C interface is optional depending on region. For details, please contact the distributor where you purchased.