GRAPHTEC CE7000-60 - Chapter 11: Settings of Controls from Computer

CE7000-UM-251-9370 30
9 TROUBLESHOOTING
9.6.6 Warning Messages
Error
code
Error Display Cause Solution
W06008
When command is set to
auto, the DUMP mode is not
available.
Select the command setting to the
HP-GL or the GP-GL.
W06009
When it is panel cutting, copy
and origin point settings cannot
operate.
The copy mode and the origin point
settings cannot operate in the panel
cutting mode.
W06010
When it is copying the
registration mark data, the
rotation function cannot
operate.
The rotation function cannot operate
with the registration mark function.
W06011
When copying the registration
mark data, the mirror function
cannot operate.
The mirror function cannot operate
when copying the registration mark
data.