GRAPHTEC CE7000-60 - Page 232

CE7000-UM-251-9370 29
9 TROUBLESHOOTING
Error
code
Error Display Cause Verication item Solution
E05018
An unexpected data
is received.
Conrm data is
corrected.
Conrm the correct
data was saved to the
USB memory or the link
server PC.
E05019
This function is not
able to use while
link server data is
outputting.
Wait until job is nished.
E05020
When the device is
not selected, this
function is not able to
use.
Conrm the device is
selecting.
Select the device.
E05021
The type of barcode
is not correct.
Conrm the correct
barcode is printing.
Print the correct
barcode.
E05022
The media was
skewed while cutting
job.
Conrm media is not
screwing.
Press the enter bottom
if the media is not
screwing.
Reload the media if the
media is skewing.
E05023
The data link server
is not running.
Conrm the data link
server is running.
Run the data link server
which was specied.