GRAPHTEC CE7000-60 - Replacing the Pen Block Cover

CE7000-UM-251-9370 7-11
7 DISASSEMBLY AND REASSEMBLY
7.1.10 Replacing the Pen Block Cover
How to detach the pen block cover
(1) Remove the two M3L6 binding head screws holding the pen block cover.
23456789
2
3
4
5
6789
Pen block cover
M3L6 binding head screw
(2) Detach the pen block cover.
When the center cover is not removed, don’t move the pen block to Y direction without the pen block
cover, otherwise the center cover will cut the cables of the pen block.
When the CE7000 is going to operate without the pen block cover, remove the center cover.
How to reinstall the pen block cover
(1) Reattach the pen block cover in the reverse order in which it was detached.