GRAPHTEC CE7000-60 - Replacing the Control Panel Assembly

CE7000-UM-251-9370 7-2
7 DISASSEMBLY AND REASSEMBLY
7.1.3 Replacing the Control Panel Assembly
How to detach the control panel assembly
(1) Detach the right side cover (Refer to subsection 7.1.1.).
(2) Disconnect the control panel exible cables from the main board.
(3) Remove the three M3L6 binding head screws holding the control panel assembly.
M3L6 binding head screw
Control panel assembly
(4) Disconnect the control panel exible cables from the control panel board.
Control panel board
Control panel exible cable
How to reinstall the control panel assembly
(1) Reattach the control panel assembly in the reverse order in which it was detached.
(2) Conrm the wiring for control panel board exible cable (Refer to subsection 7.4.).