GRAPHTEC CE7000-60 - Selecting Display Language & Length Unit

CE7000-UM-251-9370 8-15
8 Electrical Adjustment
8.8 Selecting Display Language & Length Unit
TheLanguageselectionmenuandtheLengthUnitselectionmenuaredisplayedattherstpoweron.
Select the Language and the Length Unit when the Language selection is displayed.
And when you are going to enter the adjustment mode select the language to English and then select the
Length unit to METRIC.
How to select the Language and Length Unit at the rst power on
(1) Select “English” by using the position keys at the following menu.
(2) Press the ENTER key after the display language was selected.
(3) Select “METRIC” by using the position keys at the following menu.
(4) Press the ENTER key after the displaying unit was selected.
(5) The following menu is displayed.