CE7000-UM-251-9370 2-6
2 Setup
2.2.2 Assembling the stand for CE7000-130/160
Procedure
(1) Take out the following part of stand from the packing box.
Stand side bar x 2
Stock roller x 2
Media stocker L and R
Allen wrench (for M5 cap screw)
M5L16 Cap screw x 22
(Shorter)
M5L20 Cap screw x 4
(Longer)
Stopper x 2
Center bar x 1
Foot x 2
(2) Assemble the left and right stand sides and feet. Insert the four M5L16 cap screws (Shorter screw) to
the thread of the stand side bar by hand, and then tighten them by hand. Then fasten four M5L16 cap
screws by using the Allen wrench.
To Next Page
Loading...
