CE7000-UM-251-9370 8-45
8 Electrical Adjustment
(7) Press F3 key to display the following menu.
Input Y exchange position value using the up or the down position key.
(8) Input the Y exchange position value from the recorded.
(9) Press the ENTER key to display the following menu.
(10) Press F4 key to display the following menu.
Input height exchange position using the up or the down position key.
(11) Input the height exchange position value from the recorded.
(12) Press the ENTER key to display the following menu.
(13) Press the ENTER key to display the following menu.
(14) Turn off the power for the plotter. (When other adjustment is going to perform continuously it does not
need to turn off the power.)
To Next Page
Loading...
