CE7000-UM-251-9370 37
9 TROUBLESHOOTING
(9) The testing items are shown below.
1 Cam lever sensor 2 Home sensor 3 Push roller sensor 4 Rear media sensor
5 Font media sensor 6 X motor signal 7 Y motor signal 8 Tool height signal
9 [1] key 10 [2] key 11 [3] key 12 [4] key
13 POSITION [u] key 14 POSITION [t] key 15 POSITION [q] key 16 POSITION [p] key
17 [ENTER] key 18 [CONDITION] key 19 [ORIGIN] key 20 [SLOW] key
21 BARCODE] key 22 [COPY] key 23 [PAUSE/MENU] key 24 [ESC/Cross CUT] key
(10) It will return to TEST menu screen once all the test items are completed.
(11) Turn off the power to exit from the test menu.
To Next Page
Loading...
