GRAPHTEC CE7000-60 - 2.5 About the Default Screen

CE7000-UM-251-9370 4-15
4 OPER ATIONS
1, 2, 3, 4.......................... Select the menu number displayed in the screen.
POSITION keys .............. Adjusts various settings, selects numerical value changes, moves the cursor, and
changes the positions in the MENU screen.
Reading the Screen (LCD)
Information reecting the status will be displayed in the screen of the control panel.
Name of the button and corresponding function is displayed on the screen when a function is allocated to the
button on the control panel. Button name will be displayed in reverse when the button is enabled.
Following items are displayed in the default screen.
Tool condition currently using
Corresponding button name
of control panel
Set condition of media
(READY status: It will display "READY" when the media is loaded)
Display of setting condition
Command : HP-GL : HP-GL command
GP-GL : GP-GL command
None : Command AUTO
Step size : 0.1 : 0.1 mm
0.05 : 0.05 mm
0.025 : 0.025 mm
0.001 : 0.001 mm
Rotate : R90 : Rotate 90 degrees
Priority : MANUAL : Manual priority
PROGRAM : Program priority
Sort : Sort ON : Displays when
sort is on
Prefeed : PREFEED : Displays when
auto matic media
feed is on
Media set lever raised Media set lever lower
�Ready screen
(READY)
Menu screen
(PAUSE/MENU)
Condition screen
(COND/TEST)
(Valid button is displayed in reverse)
Current tool number