GRAPHTEC CE7000-60 - Page 79

CE7000-UM-251-9370 7-5
7 DISASSEMBLY AND REASSEMBLY
CE7000-130/130AP/160
How to detach the front guide
(1) Remove the four M4L6 binding head screws holding the front guide.
(Remove the ve M4L6 binding head screws holding the front guide for the CE7000-160.)
(2) Pull up the bottom of front guide, and then detach the front guide.
23456789
23456789
Front guide
M4L6 binding head screw
How to reinstall the front guide
(1) Reattach the front guide in the reverse order in which it was detached.