GRAPHTEC CE7000-60 - Page 96

CE7000-UM-251-9370 7-22
7 DISASSEMBLY AND REASSEMBLY
(4) There is direction for the Y-belt stopper plate, conrm it, and then attach the Y belt with the Y-belt
stopper plate to the Y slider.
Y belt stopper plate
This bulge must to inside.
Y belt
Y slider
(5) Attach the pen block (Refer to subsection 7.2.6.).
(6) Hang the Y belt tension spring to the Y belt tension arm.
The tension spring makes the tension of Y belt automatically.
Y belt tension spring
Y belt tension arm
CE7000-40/60
Y belt tension spring
Y belt tension arm
CE7000-130/130AP/160
(7) Position the pen block to far right side.