FCX2000-UM-251-9370 8-26
8 DISASSEMBLY AND ASSEMBLY
(8) Disconnect the X Flexible Cable from the Y relay board.
X exible cable
Y relay board
(9) Detach the X Flexible Cable from the rear bottom cover.
How to reinstall the X Flexible Cable
(1) Prepare the following size of double-sided tapes when the X Flexible cable is going to replace.
One 10 x 30 mm double-sided tape
Three 10 x 26 mm double-sided tapes
(2) Fold the new X Flexible cable as shown in the picture below.
(3) Put the double-sided tapes to as shown in the picture below.
77 mm
75 mm
85 mm
115 mm
123 mm
258 mm
307 mm
317 mm
394 mm
This side has contact terminal.
This side has contact terminal.
Mountain fold
Mountain fold
Valley fold
Valley fold
Put the 10 x 30 mm Double-sided tape to reverse side of here.
Put the 10 x 25 mm Double-sided tapes to both side of here.
Valley fold with right angle Valley fold with right angle
Valley fold
(4) Reattach the X exible cable in the reverse order in which it was detached.
(5) Put the 10 x 26 double-sided tape to as shown in the picture below.
X exible cable
Rear Y Slider
Double-sided tape
To Next Page
Loading...
