FCX2000-UM-251-9370 8-66
8 DISASSEMBLY AND ASSEMBLY
How to place the black color of Electrostatic Adhesion Panel
(1) Clean and remove the glue from the honeycomb plate.
(2) Put the double-sided Adhesion tapes to the honeycomb plate as shown in the picture below.
Double-sided Adhesion tape
Put the double-sided Adhesion
tapes to the 4th edge of
honeycomb plate.
And then have the 2 mm gap to
the each double-sided Adhesion
tapes.
2 mm gap
To Next Page
Loading...
