FCX4000-UM-251-9730 3-3
3.
OPERATIONS
Default Screen (READY Screen)
The condition number (Cut Condition) that has been set is displayed.
In this READY status, you can set the cutting and communication conditions by pressing [PAUSE/MENU] or
[COND/TEST] key.
When it is in the draft mode, the (D) is displayed after the READY.
Screen to set the corresponding conditions is displayed when the [PAUSE/MENU] key or [COND/TEST] key
is pressed.
Menu Screen Condition Screen
[PAUSE/MENU]
It will return to default screen
when [PAUSE/MENU] key is
pressed while displaying MENU
screen.
[COND/TEST]
It will return to default screen
when [COND/TEST] key is
pressed while displaying
CONDITION screen.
Page number is displayed in the upper right corner of the screen if there are many settings or selection that
will need multiple pages to display.
Press the POSITION ( , , , ) key to move to different page.
[3] key
POSITION (
,
)
Page number
Page number
Example of moving page and operation button
To Next Page
Loading...