FCX4000-UM-251-9730 3-4
3.
OPERATIONS
Icon of the corresponding operation button is displayed in the screen to change the setting values.
Increase or decrease the setting
value using POSITION (
) key.
Select the change unit by [FAST]
key.
Select the setting by number keys (1,
2, 3, 4) or POSITION (
, , , )
keys.
Example of screen to change the settings value
Contents of Operation from Menu Screen
Menu screen
Contents of the operation and settings that is displayed in MENU screen with [PAUSE/MENU] key is as
following:
[1] (TOOL) : Sets the setting for the operation of the tool.
[2] (ARMS) : Sets the settings and operation to position the tool and media, such as automatic
scanning of the registration marks by the ARMS.
[3] (AREA) : Sets the settings for area, magnication, rotate, mirror, etc., of the cutting.
[ ] (I/F) : Sets the settings of the condition for the interfacing with the control computer.
[ ] (ADV) : Sets the settings of the conditions for the basic operation of the plotter, such as display
language, unit of the measurements.
[ ] (TEST) : Performs the operation necessary for maintenance, such as self diagnostic test or
printout of the condition settings list.
[ ] (MEM.) : Performs the operation necessary for the output such as off-line output.
[PAUSE/MENU] : It will close the MENU screen and return to default screen.
[SLOW] : Displays the position key screen. When media is set, the tool position can be moved.
See the “Menu Tree” for list of the descriptions about each settings.
To Next Page
Loading...