GRAPHTEC FCX4000 - Page 74

FCX4000-UM-251-9370 7-29
7 DISASSEMBLY AND ASSEMBLY
(3) Put the three double-sided tapes to as shown in the following picture.
Rear bottom cover
FCX4000-50: 560 mm
FCX4000-60: 650 mm
X exible cable holder
(4) Reattach the X exible cable in the reverse order in which it was detached.
(5) Conrm the X exible cable is lower than the exible cable holder when the exible cable is xing to the
exible cable holder as shown in the picture below.
X exible cable holder