16 / 80
33028_mc_28_Teil2_jh
Copy Mod¢Mod
Select the point "Copy Mod¢Mod" and confirm through the SET
button.
Through the ESC button you can always interrupt the process.
• Select the model to copy and confirm the selection through the
SET button.
• Select the target memory and confirm through the SET button.
It appears a safety query. If you change to YES and press the SET but-
ton, the copy process will be performed. The copy process is inter-
rupted if you select NO.
Export to SD card
Select the "Export to SD" point an confirm through the SET button.
Through the ESC button you can always interrupt the process.
Select the model to export and confirm the selection through the
SET button.
It appears a safety query. If you change to YES and press the SET but-
ton, the export process will be performed. The process is interrupted
if you select NO.
Import from SD
Select the "Import from SD" point an confirm through the SET but-
ton.
Through the ESC button you can always interrupt the process.
• Select the model to export from the SD card and confirm through
the SET button.
• Select the target memory and confirm through the SET button.
It appears a safety query. If you change to YES and press the SET but-
ton, the import process will be performed. The import process is
interrupted if you select NO.
Note
If the imported model memory has been created in the transmitter
and is imported to the same model memory then the receiver con-
nection remains. If the model memory is imported in another trans-
mitter, then the receiver must be bound again.
01
03
04
05
frei
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
Copy from model:
R12
R12
–––
R12
M
M
G
M
Model
ULTIMATE
export ?
NO
YES
01
SD-CARD
Copy phase
Erase model
Copy model–>model
=>
=>
=>
Export to SD
Import from SD
=>
=>
=>
=>
Model
ULTIMATE
export ?
NO
YES
01
SD-CARD
05
frei
EXTRA
ALPINA
COBRA
BELL47G
Import from SD-CARD:
16/08/10
16/08/11
16/08/12
16/08/13
01
03
04
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
Import to model:
05
free
R12
R12
R12
–––
M
M
G
M
To Next Page
Loading...
