GRAUPNER mc-26

19 / 80
33028_mc_28_Teil2_jh
Control mode
In this function you can choose a control mode which will be used
for this model memory. In this way it will be determined which con-
trol movement of the related control stick will we associated to
which channel. Tap n the SET button, set the desired mode through
the selection buttons. In the "receiver assignation" section you can
see where each servo should be connected.
Binding type
Note
This menu line is only visible until no receiver is bound to the active
model memory.
This option must be selected before the binding of a receiver. You
can select between "Global" and "Model", which means:
"Global": All bound receivers react to the signals of each model
memory of the transmitter. For safety reasons it is then only possible
to change model memory only after having switched the receiver off.
"Model": Bound receivers react only to the signals of the assigned
model memory. An accidental use thorough a non specifically
assigned model memory is not possible.
Mod. Name
Stick mode
1
Base setup model
SEL
GRAUBELE
n/a
bind
Module
HoTT
Rcv Ch Map n/a
R08
Fixed-wing model
Helicopter model / Copter model
Mod. Name
Control mode
1
Base setup model
SEL
GRAUBELE
n/a
n/a
Module
HoTT
Binding type
Model
Car / boat
MODE 2 (Throttle left)
Nick
Nick
Tail rotor
Tail rotor
Motor / Pitch
Motor / Pitch
Roll
Roll
Motor / Pitch
Motor / Pitch
Tail rotor
Tail rotor
Nick
Nick
Roll
Roll
Nick
Nick
Roll
Roll
Motor / Pitch
Motor / Pitch
Tail rotor
Tail rotor
Motor / Pitch
Motor / Pitch
Roll
Roll
Nick
Nick
Tail rotor
Tail rotor
MODE 1 (Throttle right)
MODE 3 (Throttle right)
MODE 4 (Throttle left)
MODE 2 (Throttle left)
Elevator
Elevator
Rudder
Rudder
Full throttle
Motor idle
Querruder
Querruder
Full throttle
Motor idle
Rudder
Rudder
Elevator
Elevator
Aileron
Aileron
Elevator
Elevator
Aileron
Aileron
Full throttle
Motor idle
Rudder
Rudder
Full throttle
Motor idle
Aileron
Aileron
Elevator
Elevator
Rudder
Rudder
MODE 1 (Throttle right)
MODE 3 (Throttle right)
MODE 4 (Throttle left)
MODE 2 (for/backward left)
left
right
forward/backward
forward/backward
forward/backward
forward/backward
left
right
forward/backward
forward/backward
left
right
forward/backward
forward/backward
left
right
MODE 1 (for/backward right)
MODE 3 (for/backward right)
MODE 4 (for/backward left)