GRAUPNER mc-26

36 / 80
33028_mc_28_Teil2_jh
Assigning the switch / Selecting the announce
• In the column “ “ assign a switch, for each switch position it is
possible to assign an announce
• In the column "Type" you can decide if the announces have to
act globally (GL) or according to the phase (PH)
• In the right column you can select the announces available in the
memory
Phase setting
In this menu you can set up to seven different phases for the actual
model memory. Here you can assign a name to the phases. These
phase names are generated in the "General settings" menu. All the
settings depending on the phase that you have changed in the other
menus will act in the selected phase. In the second column is dis-
played the state of the phase:
Character Description
– No switch assigned
+ Phase recallable through switch

Indicates the actually active phase
Creating a phase
 Select the line of the desired phase
 Select the phase name
 Select an optional phase timer
 Set a switching timer
 Set an announce
Timer 1, Timer 2, Timer 3, Lap, Time1, Time2
Near the standard timer there are other timers available in the main
display of the transmitter. These timers can be set up in the "Phase
timer" menu. The phase timers "Timer 1 ... 3" so as the "Time1" and
"Time2" are active only in the phase assigned in this menu. In other
phases they will be hold and not displayed. The assigned start/stop
switch has no function. The lap timer still works even in case of phase
change once activated. The lap timer can be stopped in each phase
through the central ESC button.
With the "Lap" timer you can measure the lap time through a switch.
GL
GL
GL
1
2
3
4
Announce
GL
Ty p
–––
–––
–––
–––
Phase settings
Phase assignment
Phase trim
Announce
Timers (general)
Non-delayed chan
Pha1
Pha2
Pha3
Name ph.Tim.
Pha4
Pha5
normal
Strecke
–
–
–
–

Pha1
Pha2
Pha3
Announce
Pha4
Pha5

–
–
normal
Start
Strecke
–
–
Pha1
Pha2
Pha3
Name Sw.time
Pha4
Pha5

+
+
Normal
Start
Tra c k
–
–
0.1s
0.1s
0.1s
0.1s
0.1s
GRAUBELE
#01
2:22h
T
P
«Speed »
K78
0:00.0
0:00.0
5.5V
3.9V
0:00.0
M
Time1
00