GRAUPNER mc-26

74 / 80
33028_mc_28_Teil2_jh
Channel 7 - Gyro
Current gyro systems can be adjusted for a smooth, proportional
effect; you can also choose between two different modes of action
by the transmitter.
If the Gyro you are using has this option, you can specify "Normal"
Gyro action and "Heading Lock operation" in the "Offset" column in
the range of ± 125%. You can fly with maximum stabilization in nor-
mal, slow fights within this selected mode, and reducing the gyro
gain in fast roundtrips and aerobatics are performed.
You should take advantage of switching phases to enter different set-
tings in the "gyro" line.
Please read the instructions of the related gyro system.
Channel 16 - Limit
After the initialization of a new model memory with the model type
"helicopter" the input "Lim." is "free" as standard from factory.
By assigning a control, for example, the right-hand proportional slide
control SD2, the option "throttle limit" can be activated and set
again.
The "throttle limit" function acts limiting the position of the throttle
servo or the speed controller of a motor control unit.
In5
Offset
0%
0%
0%
–––
0%
Thro
Gyro
In8
–––
–––
–––
GL
GL
GL
GL
typ
Normal
fr
fr
fr
fr
SEL
In15
Offset
In13
In14
Lim.
–––
–––
–––
0%
0%
0%
0%
GL
GL
GL
GL
typ
fr
fr
fr
–––
SEL
fr
Normal